A ratchet strap is surely an efficient approach to secure your cargo, but since your strap almost certainly came without instructions, here’s a simple and fast instruction guide. These instructions should work with ratchet tie down. Whatever the size of your strap (they usually are available in 1″, 2″, 3″, or 4″ widths), they all work exactly the same way.
A ratchet strap usually is available in two pieces, so the first task is always to attach the sections. To do that, just feed the strap through the slot inside the attached handle and ratchet (move the handle down and up) up until the slot is pointing straight up. That will allow you to feed the strap through easily.
Next, pull the strap tight and hook it up to whatever you’re loading. Make sure you keep your strap straight as you’re working with it. If it gets twisted, it could possibly bind up.
Hook it on each side, making certain you don’t leave excessive slack. This really is a common mistake. If there’s excess slack, the strapping material can get bound up inside the handle once you start ratcheting, so that it is challenging to release. If the binding is severe enough, you could even end up needing to cut the strap.
Once you get two points hooked up, all you want do is pull the strap tight. Line it up, again making sure you continue everything in line. Once you’ve done that, grab the handle, pull dexypky18 release, and mini ratchet straps it until it’s tight. Be sure you move the handle down again to the closed position when you’re done ratcheting.
Your cargo must be safely attached and able to go.
When you’re able to release the strap, once more make sure everything’s in line in order to avoid binding issues. Then grab the release along with your thumb or fingers, pulling it and open entirely.